According to market development, the application of carbonated beverage machines has become very popular. As the upgraded incarnation of the filling machine, the carbonated beverage filling machine, fully automatic packaging machinery has a major impact on the development of the industry. After all, mechanical automation is the general trend of development, and the related production of any industry is constantly thinking about the development of automation. Therefore, the use of carbonated beverage filling machines will gradually increase, and correspondingly in the process of use, many problems will be encountered that require enterprises to pay attention to. In particular, the matching application and maintenance of the carbonated beverage filling machine has a direct impact on the long-term use of the filling machine.
Because the carbonated beverage filling machine is a model of modern automatic filling machinery, it should also pay attention to the related maintenance of the equipment. In the process of maintenance, you should pay attention to many operational details. First of all, the carbonated beverage filling machine is set without power supply, and the normal gas source is 4-6kg. During the dismantling and cleaning process of the carbonated beverage filling machine, it is not allowed to directly wash the fuselage with water. If the injection nozzle of the filling machine overflows, press the safety emergency stop switch to ensure that the workshop is tidy. In addition, do not plug and unplug the circuit device of the filling machine at will, so as to avoid electric leakage and electric shock. If the carbonated beverage filling machine is in operation, if the cylinder ejection cannot be returned due to improper operation, please press this button to reset it.
Another point that needs attention is the maintenance of the carbonated beverage filling machine. If the automatic packaging machinery wants to do the maintenance of the carbonated beverage filling machine in place, there are many problems that need attention. Therefore, in the process of maintaining the filling machine, it should be noted that the body of the automatic filling machine is made of stainless copper shell, please do not scrape its surface with sharp and hard tools. When disassembling and washing the piston and the upper fixing screw, the upper fixing screw should be removed at the same time, so as not to affect the process requirements of the other when disassembling the first one. Before cleaning the piston filling machine, the remaining product in the tank should be cleaned, and then fill the barrel with a mild cleaning solution, warm water is recommended. Use soapy water, alcohol, or other cleaning fluids if necessary. The cylinder of the carbonated beverage filling machine has been lubricated before leaving the factory, please do not open or add any lubricating oil.
